In our increasingly environmentally conscious world, it’s more important than ever to make the most of our gear. Don’t toss your broken bodyboard aside just because it has a few damages. With the right tools and a bit of know-how, you can easily repair it and extend its lifespan. In this blog post, we’ll walk you through the process of fixing your bodyboard using a reliable product called Sponge Res.
Why Repair Your Bodyboard
Before we dive into the repair process, let’s briefly discuss why repairing your bodyboard is a great idea. Repairing, rather than replacing, is a sustainable choice that reduces waste and conserves resources. Additionally, it saves you money and ensures that you get the most out of your gear. So, if your bodyboard has seen better days, don’t give up on it just yet.
What You’ll Need
To repair your bodyboard using Sponge Res, you’ll need a few essential items:
- Sponge Res: The star of the show, this adhesive is designed to fix various bodyboard issues, from reattaching parts to filling holes.
- Tape: Use tape to secure the repaired area while it dries, ensuring it sets in the right position.
- White Spirit and Cloth: To clean the damaged area and remove any residue, such as wax or grease, allowing Sponge Res to adhere properly.
The Repair Process
Now, let’s get into the nitty-gritty of how to repair your bodyboard with Sponge Res:
Cleaning the Surface
Before applying Sponge Res, it’s crucial to clean the damaged area. Dampen a cloth with white spirit and carefully clean the surface. This step is essential to remove any contaminants like wax or grease, ensuring a strong bond with the adhesive.
Applying Sponge Res
Sponge Res is a versatile adhesive, and using it is relatively straightforward. Here’s a step-by-step guide:
- Start by reading the product’s instructions to ensure you’re following the recommended guidelines, like using it in a well-ventilated area.
- Open the Sponge Res packet and locate the plastic applicator included.
- Apply a generous amount of Sponge Res to the damaged area, ensuring it’s evenly spread.
- Use the plastic applicator to spread the adhesive smoothly, similar to spreading butter on bread.
- Pay extra attention to deep or irregularly shaped damage, making sure it’s fully filled.
- Position the bodyboard piece you’re reattaching exactly where you want it and press it firmly onto the adhesive.
- Wipe off any excess adhesive that may have squished out to ensure a clean finish.
- Securing with Tape
To maintain the correct alignment and apply pressure during drying, use tape to secure the reattached bodyboard piece. Make sure it’s firmly held in place to ensure a strong bond.
Drying Time
Leave your bodyboard in a cool, dry place to dry and let the Sponge Res work its magic. It typically sets in about 15 minutes, but for a complete cure, allow it to sit for 24 hours. During this time, avoid using your bodyboard to ensure a strong, long-lasting repair.
Conclusion
Repairing your bodyboard using Sponge Res is an eco-friendly, cost-effective way to get the most out of your gear. With a little patience and the right tools, you can extend the life of your beloved board, ensuring many more rides in the waves. So, don’t let a few dings and dents keep you out of the water – give your bodyboard a new lease on life and get back in the surf with confidence. Happy bodyboarding!